I've been experimenting with encaustic paints the past few days, and let me tell you, learning a new medium is frustrating. I find myself trying to use the paints in the same ways I use acrylics instead of embracing the material and allowing myself to discover its strengths and limitations.
Encaustic paints are made of beeswax and pigment (oil paint). To use them, the paint must be melted and applied while hot. My initial attraction to this material is the ability to create a sense of depth through the layering of translucent and semi-transparent waxes; I also like that items can be embedded in the surface of the wax. Last year I began adding feathers, leaves, bones, insects, and other dead things into my paintings by suspending each object in clear epoxy, but it was difficult to visually integrate the shiny, smooth surface of the epoxy with my rather grungy paintings. I think the wax could be a better way to incorporate these kinds of elements.
I read a book on encaustic techniques, but in the end I did what I normally do--I jumped in without really have any clue of what to do. So, no surprise, my first attempt was a huge failure. I ended up making a small painting that looked sort of like what I normally would do with acrylics, except way worse. It was a waxtastrophe.
One incredible thing about these paints are that if you mess up, you can take the wax right off of your painting surface and melt the encaustic medium back down and use it again. I grabbed a knife, scraped all of the wax off of my failure painting and into a pancake griddle, melted it all back together, mixed in some oil paint for color, and started making monoprints. A lot of monoprints. Enjoy.