In Florida, most camping I've found is far from those picturesque peaks --overcrowded campgrounds full of satellite-tv-equipped trailers are peppered along alligator-ridden rivers--but the Sunshine State also has a beautiful network of spoil islands. These small, vacant refuges are accessible only by boat and are free for the nightly mischief of camping.
The evening was spent laughing and telling scary stories while we swayed in our hammocks, and I knew that I wanted a comfy hanging bed of my own for return trips. Upon seeing the $65 price for an Eno Double-Nest Hammock like Rani had, I decided to see if I could make one for less.
These instructions are suitable for anyone who can use a sewing machine to sew lines that are mostly straight. This is an easy DIY project and my total cost was around $25 (the fabric was on sale, yay yay yay). I'm sorry to say that I get bored of sewing rather quickly, so I make a lot of lazy shortcuts. Luckily this is a very forgiving project.
Materials and Tools
- 3.5 yards rip-stop nylon in main color (green)
- 3.25 yards rip-stop nylon in accent color (blue)
- 6 feet AmSteel Blue rope
- 2 carabiners with an adequate working load
- Nylon webbing as needed to attach your hammock to trees
- Elastic headband (optional)
- Glue stick (optional)
- Sewing Machine
- A book in your favorite book size (optional)
I found AmSteel Blue rope, nylon webbing, and carabiners at a nearby boating supply store.
Step 1: Sew the Hammock Body
Cut two 14.5" pieces out of the blue nylon so that you have two 14.5" x 3.25 yard pieces.
Instead of pinning the fabric together, it was easier to guide the nylon with my hands. It glides easily into place and saves a lot of time. This is a really forgiving project visually, so I took some lazy-person shortcuts.
To make sure the hammock is durable and looks super classy, I used flat-felled seams to attach the blue and green nylon. They look really complicated but are actually really easy, so don't get nervous if you are new to sewing! Everyone will be impressed with your seemingly incredible skills.
After sewing a blue side strip to the hammock body and trimming the seam allowance to 1/2", it's time to start flat-felling the seam. Trim the green side of the seam to 1/4" inch the entire length of the seam. Then, fold the wider side of the seam allowance (blue) down over the trimmed side (green) so that the edge of the wider side meets the seam.
Because ironing nylon like is a big melty no-no, I used a glue stick to help keep the fabric from unfolding.
Open the fabric out flat and lay the folded seam flat down onto the fabric so that you can see the stitches of the seam and all the raw edges are tucked away inside the fold. Sew the seam down along the folded edge.
Repeat on the other side of the main hammock body with the other blue strip of nylon.
To make the pocket, cut a square of each fabric to be 11" x 11". Hem one side of one of the squares--whichever color you wand to be the front of the pocket--by folding the edge down 1/4", then folding again 1/4" to hide the raw edge. Sew along the inner folded edge.
Using a zig-zag stitch, sew the bottom and side edges of the pocket squares together with a generous seam allowance. Leave the top hemmed edge open. Trim the fabric to just outside of the zig-zag stitch, but leave the excess fabric on the open end of the pocket. Turn the pocket inside-out.
Hem one outer edge of the hammock by folding the edge down 1/4", then folding again 1/4" to hide the raw edge just like we did on the pocket. With the nylon, it is pretty easy to roll the edge of the fabric over with one hand while guiding the fabric into the machine with the other. This eliminates the need for pinning the fabric beforehand while still giving a consistent hem.
To hem the other hammock edge, first find the halfway point on the long side of the hammock by folding in half. Mark this with a pin. Lay the hammock out flat and place the pocket centered with this pin. Now stick a pin in the hammock at the front edge of the pocket--this will give you a reminder when you are sewing the hem to sew in the pocket as well. Remove your center-marking pin.
Hem this edge of the hammock just like the other side, but when you get to the pocket-reminder-pin, slip the un-hemmed fabric from the top of the pocket into the hammock hem and sew it in. Finish sewing the rest of the hem like normal.
Cut your rope into two equal lengths and burn the ends of the rope to keep it from unraveling. Attach each rope to a carabiner with a cow hitch knot by folding a length of rope in half, feeding the looped end through the carabiner, and pulling the ends of the rope through the loop.
Feed one end of the rope through a rope channel on the hammock, scrunching the nylon as you go until it all fits on the rope and you have enough of the rope end to work with. Tie the two ends of the rope together using a double fisherman's knot (look at that picture, because I cannot even being to use words to explain that rope-mess).
This is a self-locking knot and is very, very strong. Pull the nylon so that the knot is safely hidden in the middle of the rope channel and your carabiner hangs centered above the hammock.
You are done! The whole hammock can scrunch up and fit inside the pocket. I carry along a dollar-store black elastic headband to wrap around the whole thing and keep it secure.
The hammock can be hung like any other hammock. When I am home, I simply hook the carabiners into metal screw eyes that are sticking out of my trees, but out camping I tie a loop at both ends of a strip of webbing, loop it around a tree, and hook onto that.
I hope you enjoy dilly-dallying outside in your new hammock!